Use multiple services and environments in a deployment
This topic describes how to use multiple services and multiple environments in a deployment.
Often, you will deploy one service to one Environment in a CD stage. In some cases, you might want to use multiple services and environments in the same stage.
For example, let's say you host one infrastructure per customer and want to deploy your service to all customer infrastructures in the same pipeline. Instead of creating separate stages for each service and infrastructure combination, you can just deploy a single service to all infrastructures in the same stage.
This functionality is also supported for GitOps clusters by configuring multiple clusters per environment.
Another example would be when you have multiple QA environments and what to deploy to all of them together.
With multiple Harness services and environments in the same CD stage, you can:
- Deploy one service to multiple environments.
- Deploy multiple services to one environment.
- Deploy multiple services to multiple environments.
Creating multiple services and environments
You can create services, environments, and environment groups inline when creating your CD stage, or you can create them separately and select them in the stage.
For more information on services and environments, go to services and environments overview.
Deploy one service to multiple environments or infrastructures
You can deploy one service to multiple environments.
-
In your CD stage, select Service.
-
In Select Services, select the service you want to deploy. Here's an example using Nginx:
-
Select Continue.
-
In Environments, enable Deploy to multiple Environments or Infrastructures. You can select one or more environments, and then one or more infrastructures in each environment.
-
In Specify Environments, select one or more Environments. Each environment is now listed.
-
For each environment, in Specify Infrastructures, select one or more infrastructures, or select All. Here's an example using one environment and two of its infrastructures.
For details on Deploy to Environments or Infrastructures in parallel?, go to deploying in parallel or serial below.
-
Select Continue, select an execution strategy, and complete the execution steps.
-
Select Save.
-
Select Run, and then Run Pipeline. You can see both infrastructures displayed in the target environment:
You can click each infrastructure to see the deployment to it or user the console view to jump between the infrastructures:
Deploy multiple services to one environment
You can deploy multiple services to the same environment and single infrastructure. You can deploy the services serially or in parallel.
- In your CD stage, select Service.
- Enable the Deploy multiple Services setting.
- In Select Services, select the services you want to deploy.
For information on Deploy services in parallel, go to deploying in parallel or serial below.
If one or more of the services uses runtime inputs, you can view the settings or switch them to fixed value and add a value.
The services displayed depend on the Deployment Type in Overview. For example, if the deployment type is Kubernetes, only Kubernetes services are listed in the Select Services list.
- Select Continue.
- In Environment, select a single environment and infrastructure. You don't need to enable Deploy to multiple Environments or Infrastructures.
- Select Continue, select an execution strategy, and complete the execution steps.
- Select Save.
- Select Run, and then Run Pipeline.
You can see the two service deployments running in parallel on the same infrastructure.
Deploy multiple services to multiple environments
You can deploy multiple services to multiple environments and infrastructures. You can deploy the services serially or in parallel.
-
In your CD stage, select Service.
-
Enable the Deploy multiple Services setting.
-
In Select Services, select the services you want to deploy.
For information on Deploy services in parallel, go to deploying in parallel or serial below. If one or more of the services uses runtime inputs, you can view the settings or switch them to fixed value and add a value.
The services displayed depend on the Deployment Type in Overview.
-
Select Continue.
-
In Environment, enable Deploy to multiple Environments or Infrastructures.
-
Select multiple environments and infrastructures. In the following example, we are deploying to a single environment but multiple infrastructures in the environment.
-
Select Continue, select an execution strategy, and complete the execution steps.
-
Select Save.
-
Select Run, and then Run Pipeline.
You can see the two service deployments running in parallel on both infrastructures.
The service deployments are grouped by Infrastructure. The first two services are running in parallel on one infrastructure and the second two services are running on the other infrastructure.
Deploy services to infrastructures using filtered list
You can deploy services to infrastructures in an environment or environment group using filtered list.
Make sure that you have added tags when creating your environment in the Configuration tab.
Make sure that the feature flags ENV_GROUP, OPTIMIZED_GIT_FETCH_FILES are enabled. Contact Harness Support to enable the feature.
-
In your CD stage, select Service.
-
In Select Services, select the services you want to deploy.
-
Select Continue.
-
In the Environments tab, enable Deploy to multiple Environments or Infrastructures.
-
Select Environment or Environment Group.
You can select one or more environments (or an environment group), and then one or more infrastructures in each environment. -
In Infrastructures, select Deploy to filtered list, and then select + Add Filters.
-
In FILTERS ON ENTITIES, select Infrastructure.
-
In Type, select:
-
All to deploy the selected services to all infrastructures within the environment or environment group.
-
Tags, and then enter the tags in CONDITION to deploy the selected service(s) to the infrastructures with these tags.
Select Any to deploy the selected services to infrastructures that have any of these tags.
Select All to deploy the selected services to infrastructures having all these tags.
You can select CONDITION as a fixed value, runtime input, or expression. The supported expressions are
<+service.tags>and<+pipeline.tags>.
-
-
Select Continue, select an execution strategy, and complete the execution steps.
-
Select Save.
-
Select Run, and then Run Pipeline.
You can see the infrastructures with the selected tags displayed in the target environment.
Deploy services to GitOps clusters using filtered list
You can deploy services to the GitOps clusters in an environment using filtered list.
Make sure that you have added tags when creating your environment in the Configuration tab.
Make sure that the feature flags ENV_GROUP, OPTIMIZED_GIT_FETCH_FILES are enabled. Contact Harness Support to enable the feature.
-
In your pipeline, create a Deploy stage with the GitOps option enabled.
-
In your CD stage, select Service.
-
In Select Services, select the services you want to deploy.
-
Select Continue.
-
In the Environments tab, enable Deploy to multiple Environments or Clusters.
-
Select Environment or Environment Group.
You can select one or more environments (or an environment group), and then one or more infrastructures in each environment. -
In Clusters, select Deploy to filtered list, and then select + Add Filters.
-
In FILTERS ON ENTITIES, select Clusters.
-
In Type, select:
-
All to deploy the selected services to all clusters within the environment or environment group.
-
Tags, and then enter the tags in CONDITION to deploy the selected services to the clusters with these tags.
Select Any to deploy the selected services to clusters that have any of these tags.
Select All to deploy the selected services to clusters having all these tags.
You can select CONDITION as a fixed value, runtime input, or expression. The supported expressions are
<+service.tags>and<+pipeline.tags>.
-
-
Select Continue, select an execution strategy, and complete the execution steps.
-
Select Save.
-
Select Run, and then Run Pipeline.
You can see the clusters with the selected tags displayed in the target environment.
Deploying in parallel or serial
You can deploy services to environments and infrastructures in parallel or serial, with the following options:
- Services in parallel to environments in parallel.
- Services in parallel to environments in serial.
- Services in serial to environments in parallel.
- Services in serial to environments in serial.
Parallel executions are shown vertically and serial executions are show horizontally.
You can see two service deployments running in parallel on the same infrastructure.
Here you can see two service deployments run serially on the same infrastructure:
Propagating multiple services
You can propagate a stage configured with multi-service from previous configured stage. In the example below, If configured multi-service in stage deployKubernetes you will be able to reference the service configuration in stage dev.
- stage:
name: deployKubernetes
identifier: Deploy_Kubernetes
description: Golden Kubernetes Deployment Stage
type: Deployment
spec:
deploymentType: Kubernetes
execution:
steps:
- step:
type: K8sDryRun
name: Dry Run
identifier: Dry_Run
spec: {}
timeout: 10m
- step:
type: K8sApply
name: Apply
identifier: Apply
spec:
filePaths:
- cdng/
skipDryRun: false
skipSteadyStateCheck: false
skipRendering: false
overrides: []
timeout: 10m
- step:
type: HarnessApproval
name: Approval
identifier: Approval
spec:
approvalMessage: Please review the following information and approve the pipeline progression
includePipelineExecutionHistory: true
isAutoRejectEnabled: false
approvers:
userGroups:
- account._account_all_users
minimumCount: 1
disallowPipelineExecutor: false
approverInputs: []
timeout: 1d
when:
stageStatus: Success
- step:
type: K8sRollingDeploy
name: Rolling Deployment
identifier: RRolling_Deployment
spec:
skipDryRun: <+input>
pruningEnabled: false
timeout: 10m
- step:
type: K8sDelete
name: Cleanup
identifier: Cleanup
spec:
deleteResources:
type: ReleaseName
spec:
deleteNamespace: false
timeout: 10m
rollbackSteps:
- step:
name: Rollback Rollout Deployment
identifier: rollbackRolloutDeployment
type: K8sRollingRollback
timeout: 10m
spec:
pruningEnabled: false
services:
values:
- serviceRef: kubernetes
serviceInputs:
serviceDefinition:
type: Kubernetes
spec:
artifacts:
primary:
primaryArtifactRef: <+input>
sources: <+input>
metadata:
parallel: false
environments:
metadata:
parallel: true
values:
- environmentRef: k8sdev
deployToAll: false
infrastructureDefinitions:
- identifier: dev
inputs:
identifier: dev
type: KubernetesDirect
spec:
namespace: <+input>
tags: {}
failureStrategies:
- onFailure:
errors:
- AllErrors
action:
type: StageRollback
when:
pipelineStatus: Success
- stage:
name: dev
identifier: dev
description: ""
type: Deployment
spec:
deploymentType: Kubernetes
services:
useFromStage:
stage: Deploy_Kubernetes
In the subesequent stage you will see a Propagate from previous stage option. This will allow you to pick the previous stage's service configuration.
- stage:
name: dev
identifier: dev
description: ""
type: Deployment
spec:
deploymentType: Kubernetes
services:
useFromStage:
stage: Deploy_Kubernetes
Using environment groups
You can select target environments and infrastructures using environment groups.
- In Environment, select Deploy to multiple Environments or Infrastructures, and then select Environment Groups.
- In Specify Environment Group, select one Environment Group. You cannot select multiple environment groups.
- In Specify Environments, select the environments you want to use.
- For each environment, in Specify Infrastructures, select the infrastructures you want to use.
Here's an example with an environment group containing two environments. One environment has two infrastructures and the other has one infrastructure.
Here's what the deployment looks like:
The console view can also help view multiple deployments clearly:
Rollback with multiple services and environments
With a multi service to multi infrastructure stage, every combination of service and infrastructure is treated as a separate deployment.
Consequently, if you are deploying services A and B to infrastructure 1 and the deployment of service A to infrastructure 1 fails, it will only impact the deployment of service B to infrastructure 1 if the services are deployed serially (and service A is first).
If the services are deployed in parallel, the failure of of service A to infrastructure 1 will not impact the deployment of of service B to infrastructure 1. The failed deployment of service A to infrastructure 1 will roll back, but the deployment of of service B to infrastructure 1 will not roll back.
Triggers and multiple services
Triggers are applied at the pipeline level. If you have a trigger that runs a pipeline when a service's manifest or artifact changes, and that service is part of a multi service stage, the trigger will initiate the deployment of all services in that pipeline.
The trigger runs the entire pipeline, not just the service with the manifest or artifact that initiated the trigger.
Max concurrency
When you view a multi service or environment deployment, you can see Max Concurrency:
Max concurrency changes based on the following:
- If you select Deploy services in parallel, Max concurrency is equal to the number of services.
- If you select Deploy to Environments or Infrastructures in parallel, Max concurrency is equal to the number of environments or infrastructures.
- If you select Deploy services in parallel and Deploy to Environments or Infrastructures in parallel, Max concurrency is equal to the number of services multiplied by the number of environments.
Limitations
- Reconciliation for Harness services, environments, and infrastructure definitions is not supported for deployments using multiple services, environments, or infrastructures, respectively.
- You cannot propagate multi environments between stages
- When using stage variables with multi environments, the expression used for a particular stage changes. For example, if the expression for a stage without multi environment is
<+pipeline.stages.sampleStage.variables.resourceNamePrefix>, for multi environment, expression path changes and gets updated based on the iteration number of stage like this,<+pipeline.stages.sampleStage_1.variables.resourceNamePrefix>.