Skip to main content

iOS SDK reference

note

This SDK is not currently supported on Harness Self-Managed Enterprise Edition (on premises).

This topic describes how to use the Harness Feature Flags iOS SDK for your iOS application. 

For getting started quickly, you can use our sample code from the SDK README. You can also clone and run a sample application from the iOS SDK GitHub Repository.

The SDK caches your Feature Flags. If the cache can't be accessed, the defaultValue is used.

Before you begin

Make sure you read and understand:

Version

Latest SDK version can be found on GitHub Release Page

Requirements

Install the SDK

You can install the iOS SDK using the following dependency managers:

  • Swift Package Manager (SPM)
  • CocoaPods
  • Carthage

Install using SwiftPM

If you are using Swift Package Manager, you can add the SDK as a dependency in either an Xcode project or in a Package.swift file:

Xcode:

Select File > Swift Packages > Add Package Dependency and enter the iOS SDK repository clone URL, then select your desired version constraints.

Package.swift:

Add ff-ios-client-sdk to the dependencies section of your Package.swift file, for example:

dependencies: [  
.package(url: "https://github.com/drone/ff-ios-client-sdk.git", .upToNextMinor(from: "1.0.3"))
]

Install using CocoaPods

CocoaPods is built with Ruby and can be installed with the default Ruby on macOS. You can use a Ruby Version manager, however, we recommend that you use the standard Ruby available on macOS.To install the iOS using CocoaPods, complete the following steps:

  1. To install CocoaPods using the default Ruby available on macOS, use the sudo command when installing the gems, for example:
$ sudo gem install cocoapods
  1. Once Cocoapods is installed, create a Podfile in your root project folder:
$ pod init
  1. Import the ff-ios-client-sdk to your .xcproject. To do this,  add ff-ios-client-sdk to your newly created Podfile, for example:
platform :ios, '10.0'  
use_frameworks!

target 'MyApp' do
pod 'ff-ios-client-sdk'
end

Then, save the changes. 4. Use the install command to install the packages:

$ pod install

Make sure that you are using .xcworkspace  instead of your .xcodeproj  to utilize the imported Pods.

Install using Carthage

To integrate your application using Carthage, complete the following step:

  1. Go to the root folder of your project and create a Cartfile. This where you put all the dependencies that you use with Carthage:
$ touch Cartfile
  1. Add the following line to your Cartfile:
github "drone/ff-ios-client-sdk"
  1. Fetch the source for ff-ios-client-sdk from the repository specified in the Cartfile:
$ carthage update --no-build

A new folder Carthage is created at the same location as Cartfile and .xcodeproj. In the Carthage folder, another folder called Checkout is created, this folder contains the source code.

  1. Create a project for ff-ios-client-sdk dependency.

    1. Run the following command from your project's root folder:
    //From your project's root folder  
    $ cd Carthage/Checkouts/ff-ios-client-sdk
    1. Then run the following command:
    $ swift package generate-xcodeproj
    1. Or, you can enter it all on the same line:
    //From your project's root folder  
    $ cd Carthage/Checkouts/ff-ios-client-sdk && swift package generate-xcodeproj
  2. Build the project and place it in the Build folder next to Checkouts. Run the following command from your project's root folder:

$ carthage build --use-xcframeworks --platform iOS
  1. In your application targets’ General tab, in the Frameworks, Libraries, and Embedded Content, drag and drop the .xcframework file from the Carthage/Build folder.
  2. In Embed, select Embed & Sign.
  3. Import the ff_ios_client_sdk.
  4. (Optional) When a new version of ff-ios-client-sdk is available and you want to update this dependency, run:
$ carthage update --use-xcframeworks --platform iOS

Import the SDK

To import the SDK, use the following command:

import ff_ios_client_sdk

Initialize the SDK

To initialize the iOS SDK, you need to:

  1. Add your Client SDK key to connect to your Harness Environment.
  2. Add a Target that you want to Evaluate against a Feature Flag.
  3. (Optional) Configure the SDK options.
  4. Complete the initialization with the SDK using the Client SDK Key, Target, and Configuration parameters you set.

Add your Client SDK Key

To connect to the correct Environment that you set up on the Harness Platform, you need to add the Client SDK Key from that Environment. Input the Client SDK Key into the apiKey parameter.

Add a Target

Details

What is a Target? Targets are used to control which users see which Variation of a Feature Flag, for example, if you want to do internal testing, you can enable the Flag for some users and not others. When creating a Target, you give it a name and a unique identifier. Often Targets are users but you can create a Target from anything that can be uniquely identified, such as an app or a machine.

For more information about Targets, go to Targeting Users With Flags.

To add a Target, build it using CfTarget.builder and pass in arguments for the following:

ParameterDescriptionRequired?Example
identifierID of the Target.Read Regex requirements for Target names and identifiers below for accepted characters.Required.identifier("HT_1")
Regex requirements for Target names and identifiers

Identifier

Regex: ^[A-Za-z0-9.@_-]*$
Must consist of only alphabetical characters, numbers, and the following symbols:
. (period)
@ (at sign)
-(dash)
_ (underscore)

The characters can be lowercase or uppercase but cannot include accented letters, for example Cafe_789.

Name Regex: ^[\\p{L}\\d .@_-]*$

Must consist of only alphabetical characters, numbers, and the following symbols:
. (period)
@ (at sign)
-(dash)
_ (underscore)
(space)

The characters can be lowercase or uppercase and can include accented letters, for example Café_123.

For example:

let target = CfTarget.builder().setIdentifier("HT_1").build()

Configure the SDK

You can configure the following features of the SDK:

NameDescriptionDefault Value
baseUrlThe URL used to fetch Feature Flag Evaluations. When using the Relay Proxy, make sure the URL you provide is publicly available.https://config.ff.harness.io/api/1.0
eventUrlThe URL for posting metrics data to the Feature Flag service. When using the Relay Proxy, make sure the URL you provide is publicly available.https://events.ff.harness.io/api/1.0
pollIntervalThe interval in seconds that we poll for changes when you are using stream mode.60 (seconds)
streamEnabledSet to true to enable streaming mode.Set to false to disable streaming mode.true
analyticsEnabledSet to true to enable analytics.Set to false to disable analytics.Note: When enabled, analytics data is posted every 60 seconds.true

Use cfConfiguration.builder to declare the configuration options you want to use, for example:

let configuration = CfConfiguration.builder().setStreamEnabled(true).build()

Complete the initialization

Complete the initialization using the apiKey, configuration, and target variables, for example:

CfClient.sharedInstance.initialize(apiKey: "YOUR_API_KEY", configuration: configuration, target: target)

Additionally, you can also pass in a cache:onCompletion object that adopts the StorageRepositoryProtocol. This is optional, if you choose not to use it the internal built-in cache will be used instead.

Sample of initializing the SDK

initialize(apiKey:configuration:cache:onCompletion:)

let configuration = CfConfiguration.builder().setStreamEnabled(true).build()  
let target = CfTarget.builder().setIdentifier("Harness_Target_1").build()
CfClient.sharedInstance.initialize(apiKey: "YOUR_API_KEY", configuration: configuration, target: target) { (result) in
switch result {
case .failure(let error):
//Do something to gracefully handle initialization/authorization failure
case .success:
//Continue to the next step after successful initialization/authorization
}
}

Evaluate a Flag

Evaluating a Flag is when the SDK processes all Flag rules and returns the correct Variation of that Flag for the Target you provide. 

If a matching Flag can’t be found, or the SDK can’t remotely fetch flags, the default value is returned. 

There are different methods for the different Variation types and for each method you need to pass in:

  • Identifier of the Flag you want to evaluate
  • The default Variation

The Flag is evaluated against the Target you pass in when initializing the SDK.

Evaluate a string Variation

CfClient.sharedInstance.stringVariation("your_evaluation_id", defaultValue: String?) { (evaluation) in  
//Make use of the fetched `String` Evaluation
}

Evaluate a boolean Variation

CfClient.sharedInstance.boolVariation("your_evaluation_id", defaultValue: Bool?) { (evaluation) in  
//Make use of the fetched `Bool` Evaluation
}

Evaluate a number Variation

CfClient.sharedInstance.numberVariation("your_evaluation_id", defaultValue: Int?) { (evaluation) in  
//Make use of the fetched `Int` Evaluation
}

Evaluate a JSON Variation

CfClient.sharedInstance.jsonVariation("your_evaluation_id", defaultValue: [String:ValueType]?) { (evaluation) in  
//Make use of the fetched `[String:ValueType]` Evaluation
}

ValueType can be one of the following:

  • ValueType.bool(Bool)
  • ValueType.string(String)
  • ValueType.int(Int)
  • ValueType.object([String:ValueType])

Listen for events

The registerEventsListener method provides a way to register a listener for different events that might be triggered by SDK.

The possible events, reasons for being emitted, and their responses are outlined in the following table:

EVENT_TYPEReasonResponse
onOpenThe SDK has successfully opened a streaming connection to the Feature Flags service, and is listening for events. No further action required from your application code.-
onCompleteThe SDK has closed the streaming connection to the Feature Flags service and is no longer listening for events.
This can happen if the SDK is shutdown, of if there is a transient networking issue, and the SDK will attempt to reconnect. In both cases, no further action is required.
-
onEventListenerThe SDK has streamed a new evaluation after a flag has been changed using the Harness web application. You should evaluate any flags to get the latest variation.
Note this is for individual flag changes only, and this event is not applicable to target group changes.
See EVALUATION_RELOAD for streaming target group changes.
Evaluation
onPollingThis event can be emitted for 3 reasons.
1) A target group change has been made using the Harness web application, and all evaluations has been reloaded.
2) Streaming has been disabled and the SDK is in polling mode, and a poll has completed which has reloaded all evaluations.
3) The SDK has disconnected from the stream and has entered polling mode, and a poll has completed which has reloaded all evaluations.
[Evaluation]
CfClient.sharedInstance.registerEventsListener() { (result) in  
switch result {
case .failure(let error):
//Gracefully handle error
case .success(let eventType):
switch eventType {
case .onPolling(let evaluations):
//Received all evaluation flags -> [Evaluation]
case .onEventListener(let evaluation):
//Received an evaluation flag -> Evaluation
case .onComplete:
//Received a completion event, meaning that the
//SSE has been disconnected
case .onOpen(_):
//SSE connection has been established and is active
}
}
}
}

Test your app is connected to Harness

When you receive a response showing the current status of your Feature Flag, go to the Harness Platform and toggle the Flag on and off. Then, check your app to verify if the Flag Variation displayed is updated with the Variation you toggled.

note

The SDK must run for at least 60 seconds before it sends metrics. Please ensure metrics have not been disabled in the SDK.

Close the SDK client

In most applications, you won't need to close the SDK client.

However, you should close the SDK client if:

  • Your application is about to terminate. Closing the client ensures that all associated resources are released.
  • You have determined that you do not need to evaluate flags again in your application lifecycle.
important

The SDK does not evaluate flags after the client is closed.

To close the SDK client, call this method:

CfClient.sharedInstance.destroy() 

You also need to call this method when changing accounts on the CfTarget object to re-initialize and fetch Evaluations for the correct Target.

Additional options

Using our public API methods

You can also use the public API methods to initialize and implement the Feature Flag iOS SDKs. All the below methods are called on CfClient.sharedInstance.

The Public API exposes the following methods that you can utilize:

public func initialize(apiKey:configuration:target:cache:onCompletion:)
public func stringVariation(evaluationId:defaultValue:completion:)
public func boolVariation(evaluationId:defaultValue:completion:)
public func numberVariation(evaluationId:defaultValue:completion:)
public func jsonVariation(evaluationId:defaultValue:completion:)
public func registerEventsListener(events:onCompletion:)
public func destroy()

Sample code for an iOS application

Here is a sample code for using the Harness iOS SDK with an iOS application:

import UIKit  
import ff_ios_client_sdk
class ViewController: UIViewController {
override func viewDidLoad() {
super.viewDidLoad()
NSLog("Start")
let config = CfConfiguration.builder()
.setStreamEnabled(true)
.build()
let target = CfTarget.builder().setIdentifier("Harness").build()
CfClient.sharedInstance.initialize(
apiKey: "YOUR_API_KEY,
configuration:config,
target: target
) { [weak self] result in
switch result {
case .failure(let error):
NSLog("End: Error \(error)")
case .success():
NSLog("Init: Ok")
CfClient.sharedInstance.boolVariation(evaluationId: "EVALUATION_ID", { (eval) in
print("Value: \(eval!)")
})
CfClient.sharedInstance.registerEventsListener() { (result) in
switch result {
case .failure(let error):
print(error)
case .success(let eventType):
switch eventType {
case .onPolling:
print("Event: Received all evaluation flags")
case .onEventListener(let evaluation):
print("Event: Received an evaluation flag, \(evaluation!)")
case .onComplete:
print("Event: SSE stream has completed")
case .onOpen:
print("Event: SSE stream has been opened")
case .onMessage(let messageObj):
print(messageObj?.event ?? "Event: Message received")
}
}
}
}
}
}
override func viewWillDisappear(_ animated: Bool) {
CfClient.sharedInstance.destroy()
NSLog("End: Ok")
super.viewWillDisappear(animated)
}
}

Troubleshooting

The SDK logs the following codes for certain lifecycle events, for example authentication, which can aid troubleshooting.

CodeDescription
1000Successfully initialized
1001Failed to initialize due to authentication error
1002Failed to initialize due to a missing or empty API key
1003wait_for_initialzation was called and the SDK is waiting for initialzation to complete
1004Server presented an invalid TLS certificate
1005Server hostname mismatch in TLS certificate
2000Successfully authenticated
3000SDK Closing
3001SDK closed successfully
4000Polling service started
4001Polling service stopped
5000Streaming service started
5001Streaming service stopped
5002Streaming event received
5003Streaming disconnected and is retrying to connect
5004Streaming stopped
6000Evaluation was successfully
6001Evaluation failed and the default value was returned
7000Metrics service has started
7001Metrics service has stopped
7002Metrics posting failed
7003Metrics posting success